Loading...

Mounted Spreader Body
  • Mounted Spreader Body

    Mounted Spreader Body

  • Accessories

    Accessories

  • 8.0T Pull Spreader

    8.0T Pull Spreader

  • 9.5T Pull Spreader

    9.5T Pull Spreader

The Double Duty spreader line by GVM offers the largest and most accurate spreading pattern in the industry. The Double Duty is guaranteed to spread 90-105 feet at less than 15 percent coefficient of variation with granular fertilizer. The wide spread pattern is due to the patented reverse rotating spinners, and their accuracy is due to the pre-adjusted funnel forcing material to fall precisely onto the spinner disc. Fewer trips will be made through the field thanks to the Double Duty’s wider spread pattern, saving you time and money and minimizing field compaction. 

  • Single product applicator with multi-product options
  • Patented spinner design spreads a guaranteed 90-105 ft flat pattern
  • Spreads fertilizer, gypsum, lime and most litters
  • 34 in. wide belt-over-chain conveyor for even flow to spinners and to avoid bridging when spreading lime and litter
  • Patented funnel divider allows the material to flow to the spinners with pinpoint control
  • 24 in. computer controlled spinners maintain consistency and accuracy
  • Multiple capacities to fit any machine:
    • 8.0 ton, 10 ft, 250 cu ft struck capacity
    • 9.5 ton, 12 ft, 305 cu ft struck capacity
    • 11 ton, 13 ft, 330 cu ft struck capacity
  • Available in 304 or painted 409 stainless steel
  • Raven or Ag Leader controller and GPS
  • Raven controller and GPS options:
    • SCS 5000CANcontroller
    • Envizio Pro CAN Controller with built in Phoenix 200 Helix receiver
    • Viper Pro CAN Controller with guidance software
  • All stainless steel fenders with mud flaps
  • Brand PWM control with 180-count rate sensor and CAN node
  • Bin level sensors
  • DOT LED side marker lights and rear LED 3 light, light bar LED tail lights kit, trailer plug and back up alarm
  • Stainless steel bi-fold ladder
  • Frame cover, 304 stainless steel (underbody panel recommended)
  • Fusion Cable-Lok Roll Tarp with stainless bows
  • Fusion Electric Cable-Lok Roll Tarp with transmitter and stainless bows

Double Duty Fusion Insert

MicroBin

  • Dual hopper removable insert, to broadcast two products simultaneously
  • Twin hoppers are at even heights for easy loading and roll tarp installation
  • Holds 3 tons urea, 4 tons pot ash, 95 cu ft capacity
  • Made of all 304 stainless steel
  • 27 inch no. 4 belt over chain conveyor system
  • Bolt into the Double Duty  to apply up to 3 products
  • Add-on hopper allows you to spread granular micronutrients or seeds as a second or third product.
  • All 304 stainless steel construction
  • 11 cu ft, 1100 lb. struck capacity
  • Control system offers special features for controlling the 34 inch belt over chain drag to ground speed regardless of varying terrain
  • Ability to automate spinner speeds within 3%
  • Viper DGPS controller
  • 55 gallon PWM hydraulic system spreads rates as low as 100 lb fertilizer per acre and as high of over 3 ton of lime per acre at speeds over 12 mph
  • Raven 180 count sensor, 40 gallon hydraulic reservoir, 12 volt cooler and pressure relief valve system
  • Patented PWM controlled, 24 in. 304 stainless steel spinner design
  • Commercial heavy-duty gear motors with double bearing output shafts are bottom mounted to a ¼ in. 304 stainless steel spinner nest assembly
  • Standard quick-change 304 stainless steel uniquely designed lime and fertilizer funnel with hillside divider
  • Number 4, 34 in. belt over chain conveyor system 
    • Heavy-duty pintle chain
    • Multi-ply belt riveted (5 rivets per crossbar) to the crossbars
    • Solid rubber sealer strips
    • Twin-line chain oilier with clear sight-gauge tubing.
  • Inverted removable V-Shield was reduces the chance of lime bridging and protects the conveyor system. 9.5T and 11.0T models only.
  • Rawson 6:1 reduction dual-pinion spur gear drive with two hydraulic Charlyn motors drives the conveyor chain.
  • All 304 stainless steel or painted 409 stainless steel body construction
    • 10 gauge hopper
    • 7 gauge sub frame
    • 4 x 2 x 3/16 in. stainless steel cross tubes (mild steel cross members on the 409 SS construction). 
  • Four point attach locations for full flotation combo mount.
  • Bolt-in rear end gate matches the steel of the spreader.

Regardless of varying terrain, the GVM Double Duty spreader line offers a unique control system to provide the widest and most accurate spreading pattern in the industry. The Double Duty maintains a constant spread pattern because of its unique spinner design and its ability to automate spinner speeds within three percent.

The Double Duty has an exceptionally wide and flat spread pattern thanks to its patented reverse rotating spinners. Its pre-adjusted funnels forces material to fall precisely onto the spinner disc, resulting in a flat and accurate pattern which requires no tray adjustment. This machine guarantees a 90-105 foot spread pattern at less than fifteen percent coefficient of variation with granular fertilizer. Fewer trips will be taken through the field because of the Double Duty’s wider spread pattern, which minimizes compaction and reduces fuel consumption.

The Double Duty spreader gives an even flow to the spinners without any bridging when spreading litter or lime because GVM’s belt is wider than most. Material flows to the spinner with pin-point control due to the funnel divider and maintains consistency and accuracy by being controlled by the 24 inch computer controlled spinners. 

Hopper

 

8.0 Ton

9.5 Ton

11.0 Ton

Dimensions

10 ft x 102 in. wide

12 ft x 102 in. wide

13 ft x 102 in. wide

Struck capacity

250 ft³ (7.1 m³)

305 ft³ (8.6 m³)

330 ft³ (9.3 m³)

Sub-frame construction

7 gauge subframe, 
4 x 2 x 3/16 SS cross tubes

7 gauge subframe, 
4 x 2 x 3/16 SS cross tubes

7 gauge subframe, 
4 x 2 x 3/16 SS cross tubes

Construction

10 gauge, 304 or 409 painted SS

10 gauge, 304 or 409 painted SS

10 gauge, 304 or 409 painted SS

Supports

-

Inverted V-shield keeps excess weight off belt to prevent bridging, matches steel of spreader

Inverted V-shield keeps excess weight off belt to prevent bridging, matches steel of spreader

Rear gates

Bolt-in rear end gate, matches steel of spreader

Bolt-in rear end gate, matches steel of spreader

Bolt-in rear end gate, matches steel of spreader

 

Conveyor

 

8.0 Ton

9.5 Ton

11.0 Ton

Size

No. 4, 34 in. belot-over-chain conveyor

No. 4, 34 in. belot-over-chain conveyor No. 4, 34 in. belot-over-chain conveyor

Material

Heavy duty pintle chain with multi-ply belt, riveted to crossbar (5 rivets per crossbar)

Heavy duty pintle chain with multi-ply belt, riveted to crossbar (5 rivets per crossbar) Heavy duty pintle chain with multi-ply belt, riveted to crossbar (5 rivets per crossbar)

Belt sealer

Solid rubber sealer strips prevent material from leaking off chain

Solid rubber sealer strips prevent material from leaking off chain Solid rubber sealer strips prevent material from leaking off chain

Chain Oiler

Twin-line with clear sight gauge tubing

Twin-line with clear sight gauge tubing Twin-line with clear sight gauge tubing

Spinners

 

8.0 Ton

9.5 Ton

11.0 Ton

Size and construction

24 in., 304 SS 24 in., 304 SS 24 in., 304 SS

Spread width

90-105 ft (27.4-32 m) 90-105 ft (27.4-32 m) 90-105 ft (27.4-32 m)

Application rate

PWM controlled hydraulic system spreads down to 100 lb fertilizer/acre to 3 tons of lime/acre at speeds over 8 mph PWM controlled hydraulic system spreads down to 100 lb fertilizer/acre to 3 tons of lime/acre at speeds over 8 mph PWM controlled hydraulic system spreads down to 100 lb fertilizer/acre to 3 tons of lime/acre at speeds over 8 mph

Accuracy

180 count sensor pairs with any field computer 180 count sensor pairs with any field computer 180 count sensor pairs with any field computer

Spinner motors

Commercial, heavy-duty gear motors with double bearing output shafts, bottom mounted to ¼ in. 304 SS spinner nest assembly Commercial, heavy-duty gear motors with double bearing output shafts, bottom mounted to ¼ in. 304 SS spinner nest assembly Commercial, heavy-duty gear motors with double bearing output shafts, bottom mounted to ¼ in. 304 SS spinner nest assembly

Spinner speed

Computer controlled hydraulic PWM valve Computer controlled hydraulic PWM valve Computer controlled hydraulic PWM valve

Belt control

Rawson 6:1 reduction dual pinion spur gear drive with two hydraulic Charlyn motors Rawson 6:1 reduction dual pinion spur gear drive with two hydraulic Charlyn motors Rawson 6:1 reduction dual pinion spur gear drive with two hydraulic Charlyn motors

Hillside divider

Quick change, 304 SS, uniquely designed for lime and fertilizer Quick change, 304 SS, uniquely designed for lime and fertilizer Quick change, 304 SS, uniquely designed for lime and fertilizer

Hydraulics

 

8.0 Ton

9.5 Ton

11.0 Ton

Requirement

Minimum
25-35 GPM @2500 PSI

Minimum 
42-52 GPM @2500 PSI
Minimum 
42-52 GPM @2500 PSI

Chassis

 

8.0 Ton

9.5 Ton

11.0 Ton

Frame

2 x 6 x ¼ in.
rectangular tubing
2 x 6 x ¼ in. 
rectangular tubing
2 x 6 x ¼ in. 
rectangular tubing

Width

120 in. (3.05 m)
center to center

120 in. (3.05 outside),
60 in. (1.52 m) inside, 
center to center
120 in. (3.05 outside),
60 in. (1.52 m) inside, 
center to center

Overall length

18 ft 9 in. (5.72 m) 22 ft (6.71 m) 23 ft (7.01 m)

Clearance

34 in. (0.86 m) 36.5 in. (0.93 m) 6.5 in. (0.93 m)

Axle

25,000 lb single axle design  50,000 lb single axle design  50,000 lb single axle design 

Hitch

Adjustable combination hitch  Adjustable combination hitch   Adjustable combination hitch  

Tires

 

8.0 Ton

9.5 Ton

11.0 Ton

Standard tires

380/90R46 Dual 380/90R46 Dual 380/90R46

Flotation tires

650/75R32 or 800/65R32, optional 650/75R32 or 800/65R32, optional 650/75R32 or 800/65R32, optional

Multi-Product Options

 

8.0 Ton

9.5 Ton

11.0 Ton

Fusion Insert

Dimension

5 ft x 102 in. wide, peaked ends 5 ft x 102 in. wide, peaked ends 5 ft x 102 in. wide, peaked ends

Capacity

3 ton, 95 ft³ 3 ton, 95 ft³ 3 ton, 95 ft³

Hopper capacity

111 ft³ with Fusion Insert 111 ft³ with Fusion Insert 111 ft³ with Fusion Insert

Products

Simultaneously spread up to 2 products Simultaneously spread up to 2 products Simultaneously spread up to 2 products

Control

PWM fast close drag valve with conveyor rate sensor and bin level sensor PWM fast close drag valve with conveyor rate sensor and bin level sensor PWM fast close drag valve with conveyor rate sensor and bin level sensor

Mounting

Removable, mounts inside Double Duty after removing gate Removable, mounts inside Double Duty after removing gate Removable, mounts inside Double Duty after removing gate

MicroBin

Construction

304 SS with sight glass, vented for quick fill 304 SS with sight glass, vented for quick fill 304 SS with sight glass, vented for quick fill

Capacity

1100 lb, 11 ft³ struck 1100 lb, 11 ft³ struck 1100 lb, 11 ft³ struck

Products

Spread granular micro-nutrients as a second or third product Spread granular micro-nutrients as a second or third product Spread granular micro-nutrients as a second or third product

Control

Hydraulic servo controlled metering wheel with rate sensor and single product control node Hydraulic servo controlled metering wheel with rate sensor and single product control node Hydraulic servo controlled metering wheel with rate sensor and single product control node

Mounting

Removable, rear mounted Removable, rear mounted Removable, rear mounted

Application rate

3-35 lb per acre 3-35 lb per acre 3-35 lb per acre