Diaphragm Pumps

Diaphragm pumps are the most complete line of pumps available for spraying and pumping of herbicides, pesticides, liquid fertilizers and hard-to-handle fluids! Hypro offers a wide range of flows and pressures for slurries and suspensions. Pressures for row crop to treetop spraying applications range from 20 to 725 psi (1.4 to 50 bar) with flow rates from 3.5 to 66 gpm (13.2 to 249.8 lpm).

Low-cost maintenance and almost wear-free operation result from Hypro’s oil-bath design, premium quality, synthetic diaphragms for longer life, self-priming operation and visual, oil-level sight glass. These models can handle fluids up to 140°F (60°C) and can be run dry. Hypro diaphragm pumps can be driven by 540 rpm PTOs, 3 to 25 hp gasoline engines, or hydraulic motors.

Piston Pumps

Hypro’s Twin® piston pumps are used in a variety of spraying and pressure cleaning applications, as well as hydrostatic testing. These heavy-duty pumps are ideal for fluid handling of water and non-abrasive or general use chemicals.

All pumps are constructed from cast iron materials. They feature stainless steel valves and ball bearing, leather or fabric-reinforced Buna-N or straight Buna-N cups. You can choose from a variety of drive systems including:  belt and pulley, 540 rpm PTO, gasoline engine or electric motor.

These pumps are available in a variety of flow and pressure ranges up to a maximum of 10 gpm (37.9 lpm) and 500 psi (34.5 bar) with maximum fluid temperatures of 140° F (60° C).

Roller Pumps

Hypro roller pumps are the number one all-around choice by farmers throughout the world. The rollers (from 4 to 8, depending on the model) revolve inside the pump housing to force the spray solution through the outlet to the nozzle. Roller pumps have a low initial cost and are extremely versatile. They operate efficiently at PTO speeds of 540 and 1000 rpm and have a wide pressure range of up to 300 psi and flow rates of 2 to 74 gpm. Roller pumps are self priming and easily adapt to PTO or gas engine drives. Specific seal, roller and casting materials can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.

Centrifugal Pumps

For today’s machinery and tomorrow’s demands, Hypro centrifugal pumps lead the industry! Pump capabilities range up to 358 gpm and 190 psi. With the largest selection of models, Hypro allows you to match the right pump to your equipment and task.  Use Hypro centrifugal pumps for chemical spraying and transfer applications.

The broad, versatile line includes models with rugged housings of cast iron, stainless steel and polypropylene that stand up to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup® or other acid applications. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.

Choose from gear, belt, DC clutch, and hydraulic motor drives, as well as models that are closed coupled to gasoline engines.

Cleanload Chemical Eductor

The Hypro Cleanload is a self-contained eduction system that allows the operator to mix liquid and dry chemicals safely and quickly. 

Two models make up this series of products.  The 3374P-05T4 model consists of a 4.5 gallon hopper, allowing it to fit into smaller areas, while the 3374P-05T5 comes with a 5.5 gallon hopper and a robust tank rinse nozzle for complete rinsing of dry chemcals. 

Both models feature a 316 stainless steel venturi with eduction reates as fast as 1 second per gallon. 

For a Complete Offering of the Hypro Product Line
Call For Details - Phone (731)-536-4231